Bricked iPlay 60 Mini Pro tablet

Hell to All,

I have an AllDoCube iPlay 60 Mini Pro tablet purchased from AliExpress – Order Number = 8195390704866852 – on November 13, 2024.

Unfortunately, I bricked it while trying to update to Android 15 using the Stock ROM available on this website.

The tablet is no longer recognized when I connect to notebook.

After researching, I learned that it would be necessary to access a specific test point to trigger a Boot-ROM (BRom).

And for that, I need to know exactly where this point is on the printed circuit board (PCB).

So, somebody please indicate this point on the PCB?

Thank you very much.

Fábio Arai

Sorry to hear about your problem.

Have you tried this method from this website?

 

iPlay 60 mini Pro-T812 Software Download

Hello syin16,

Thank you for your reply. I would even try it if my tablet wasn’t bricked.

What happened: I tried to update to Android 15 using SP Flash Tools, but it didn’t restart after the entire installation process. So, I kept trying to install it several times. Eventually, the tablet wasn’t recognized by the PC (it beeps every 3-5 seconds).

And when that happens, the only method would be using test points on the board to trigger a Boot ROM (also known as BRom).

But I can’t find any information about it online. In fact, even AllDoCube hasn’t responded despite me contacting them twice already.