|
iWork 10 pro battery win10 problem
|
Technical Discussion
|
8
6983
|
|
If the Android system exists, you can check whether the charging under Android is normal.
or if you have a usb ammeter, you can also check if the actual charging current is normal.
|
|
ALLDOCUBE X1 (T801) SYSTEM UPDATE
|
Technical Discussion
|
1
4807
|
|
|
the reason it show Google Play Protect not be certified is Google does not require that machines sold overseas must be GMS certified until Android 8.0.
and about your 3 qusetions:
1.using mtk spflashtool to flash factory firmware do not need unlocking bootloader.
2.this factory firmware flashing need you Paying attention to the backup of the original data, because it tends to erase your machine’s data.so don’t flash system.img alone
4.MTK platform machine normal flashing will not let the machine die completely, even if it looks like a fake dead state, try to make the machine completely power off it will can be re-flashed
|
|
need nvram Alldocube Free Young X5 4G Phablet
|
Technical Discussion
|
5
3027
|
|
|
you can use mtk sn write tool to re-write mac address :https://androidmtk.com/download-sn-write-tool
|
|
reset to factory Win10 problem iWork10
|
Technical Discussion
|
4
6395
|
|
|
It is recommended that you reinstall windows os ,
and then restore drivers for i15tc:https://mega.nz/#!aGYEWShD!csFB2U8Ng09X97VIVKTU99AFrzsDyYu9or7Hw8YoTaU
|
|
AlldoCube X. No Boot. No led. No power+UpVolume.
|
Technical Discussion
|
21
25474
|
|
|
If the tablet does not respond at all, and may be caused by a hardware problem. It is recommended that you contact the official service by email to see if there is some way to repair it.
|
|
Cube Mix Plus 2
|
General Discussion
|
2
5704
|
|
|
Machines with the new Intel 5-6W power-consuming CPUs will probably have to wait six months or more, and such CPUs are now in serious shortage.
|
|
AlldoCube X. No Boot. No led. No power+UpVolume.
|
Technical Discussion
|
21
25474
|
|
|
So are you using the original fast charger? There may be several reasons for your situation:
1. Battery power is too low, resulting in the machine charging current is relatively small, can not start.
2. System damage, no system
3. There is a problem with the motherboard hardware.
|
|
AlldoCube X. No Boot. No led. No power+UpVolume.
|
Technical Discussion
|
21
25474
|
|
|
“Connecting to a laptop with Windows 10 shows the same VA info”——what’s this va info means?
|
|
IWork 8 Air bricked (i1 TF) after update bios
|
General Discussion
|
5
5691
|
|
|
Unfortunate news! Please try to use hdmi to connect the tablet to the another monitor to see if it can be displayed. If it can be displayed, you can try to re-flash the correct bios rom file by another monitor .
Otherwise, you can only use the biso rom programmer to burn the bios file.
|
|
AlldoCube X. No Boot. No led. No power+UpVolume.
|
Technical Discussion
|
21
25474
|
|
|
You can try connecting to your computer via USB to see if a new device will pop up in the Windows System Device Manager.
In addition, if you have a device that can monitor the output current of the charger, check the output current and voltage of the charger.
|
