|
Ipaly50 mini pro NFE boot breakdown
|
Technical Discussion
|
2
1372
|
|
If the boot mode option screen is automatically displayed when the machine is powered on, check whether the volume button of the machine works properly
|
|
Cube I7 Stylus
|
Technical Discussion
|
1
823
|
|
|
La memoria de funcionamiento de esta máquina está soldada a la placa base y el SSD de almacenamiento se puede reemplazar directamente.
|
|
iwork gt charging and keyboard input error
|
Technical Discussion
|
2
883
|
|
|
1. The charger can be replaced with other suitable chargers with PD output of 45W and above.
2. You need to set the input method yourself for the language you need.
|
|
Touch Drivers for iwork20 i1022D
|
Technical Discussion
|
1
1136
|
|
|
https://mega.nz/file/8ElWgILA#J2Za9SICJ1n3J-FCPZHrOKidKZ2t4fEts-_Q-oeI9YY
drivers for i1022d
|
|
Chrome freezes on iplay 50 pro max
|
Technical Discussion
|
1
1184
|
|
|
Can you provide a video showing that the relevant browser is not working properly, as well as information about the specific web page that is opened?
|
|
Alldocube mini pro nfe only has two touch input
|
Technical Discussion
|
1
2224
|
|
|
Please try to turn off the three-finger screenshot function, and then check whether the multi-finger operation in the corresponding software is normal.
|
|
Bricked tablet save iplay50 (T1030)
|
Technical Discussion
|
3
2172
|
|
|
Open the device manager that comes with the Windows operating system. After the machine is shut down and you press and hold the volume down key to connect to the computer, there will be a new device in the device manager. If the driver is installed well, there will be a sprd port.
If there is no response at all in the device manager, check the connection problem.
|
|
Widevine L1
|
Technical Discussion
|
1
1641
|
|
|
Widevine L1 requires the operation of writing L1key. Non-L1 machines cannot directly become L1 machines.
|
|
GTbook 13 pro not charging
|
Technical Discussion
|
1
1396
|
|
|
You can try to enter the machine bios and reset the bios to the default settings. After the machine is shut down, press and hold the power button for 30 seconds or even more than 1 minute, and then try to completely cut off the power.
|
|
SUPPORT
|
Technical Discussion
|
2
1663
|
|
|
Due to design reasons, the type-c interface does not support simultaneous OTG and charging functions of the hub.
|
