Home

Support

System update

iWork20Pro

The firmware compression package contains the flashing tutorial, please read it carefully before flashing.

System Firmware

Recommended Applications

Please pay attention to back up the tablet data before flashing, beware of data loss due to errors. FAQs

iWork20Pro(i1025)-Windows10

Product Model : i1025

File size : 11.9GB

Downloads : 8577

Update log:

Simple installation steps:

1. Prepare a 16g U disk, format it as fat32 storage format, and modify the volume label name to WINPE

2. Decompress the downloaded compressed package and copy all files As shown below in the decompressed folder to the root directory of the u disk

3. Connect the U disk to the computer, press F7 (or FN+F7) when the computer is turned on, and choose to boot from the USB flash drive to reinstall the windows os

Download

All Comments (12 comments)

Leave a Reply to mkono87 Cancel reply

Antonio RUSSO

driver audio per arch linux?

2023-07-17 @ 03:28
|
Reply
Aleksey

Здравствуйте, помогите найти драйвер на тачскрин IWORK20 pro для Windows-10 pro 64

2023-04-12 @ 16:16
|
Reply
claude

hello I just purchased the and why it says reinstall the os .Do you have any separate firmware to upgrade the BIOS and other stuff. It says the boot USB will install windows.Please advice
iWork20Pro(i1025)-Windows10
Product Model : i1025

2023-03-14 @ 02:04
|
Reply
mkono87

I booted the usb drive and its all Chinese. How the hell do I reinstall windows? Terrible company.

2022-12-28 @ 08:02
|
Reply
David Kroll

Hi. ich bin von win11 auf win10 zurückgegangen und nun funktioniert mein touchscreen nicht mehr. habe die oben genannte boot-usb runtergeladen und gestqrten bzw gebootet. funktioniert immer noch nicht. gibt es da einen einzelnen treiber für das touchsreen?

2022-11-26 @ 23:29
|
Reply
Massimo Gallerini

perché quando cerco di aprire il file compresso iWork20Pro(i1025)-Windows10 mi da un messaggio di errore : l’ archivio o è danneggiato o è in formato sconosciuto?

2022-09-23 @ 02:40
|
Reply
David Elazar

Product Model: iwork20pro
Why doesn’t the above mentioned product charge with USB charger (USB-C cable) with these specifications?

POWER ADAPTER Model: MDY-11-EZI Input: 100-240V-50Hz 0.7A Output 5.0V-3.0A 15.0W/9.0V-3.0A 27.0W/12.0V-2.25A 27.0w/20.0V-1.35A 27.0W/11.0V-3.0A 33.0W
33W

The charger received with the product reads: 12 OV 24 OW (It is not USB and has a special plug which fits the product. Input 220v).

2022-08-26 @ 01:06
|
Reply
UMBERTO

SALVE HO ACQUISTATO UN VOSTRO PC ALLDOCUBE CON WINDOWS 11
MA QUI SUL SITO HO POTUTO SOLO SCARICARE IL PACCHETTO DI RIPRISTINO CREANDO CHIAVETTA USB CON WINDOWS 10NON CE ANCHE VERSIONE CON WINDOWS 11
GRAZIE

2022-08-26 @ 00:58
|
Reply
David Elazar

I have an iwork20pro. It charges well with a USB port when using a charge connected to the electricity. However, when connected to an external backup battery type Li-on 20000mAh/74Wh Output 5V/2.1A. This battery works well with all my other equipment including my Asus laptop. Please advise.

2022-06-06 @ 19:58
|
Reply
Pavel

Where I can download drivers for USB? Last win11 update broke it

2022-05-07 @ 23:15
|
Reply