Home Page Forums Technical Discussion How to flash rom M8-20181201

Viewing 5 posts - 1 through 5 (of 5 total)
How to flash rom M8-20181201
|
2019-02-09 22:35:01
Member
Starter
#1F
Replies: 4 | Views 7276 | Favorites: 0 | Subscriptions: 1

Hi dear,

 

I just bought the M8 from Thailand (security patch 05/02/2018).  I would like to know that how to manua flash the rom 20181201 that I just download from your website.

 

Thanks.

Member
2019-02-21 20:27:34
#3F

how to do this is written in faq:

A.download the MTK flash tool and driver

First download the MTK flash tool: https://spflashtools.com/wp-content/uploads/SP_Flash_Tool_v5.1844_Win.zip

And MTK USB VCOM drivers:

MediaTek USB VCOM drivers:

https://spflashtool.com/download/MediaTek_USB_VCOM_drivers.zip

Or

https://spflashtool.com/download/Driver_Auto_Installer_v1.1236.00.zip

B.download the firmware

Download your device firmware from device official website. Unzip the firmware package.

C.install MTK driver

https://www.youtube.com/watch?v=z3cjTqCQemU

D.Use MTK flash tool to upgrade the firmware

Open SPFLASHTOOL EXE and Load the Scatter file (Click Scatter Loading).

Click on “DOWNLOAD” button on top (if not the tab), click on “yes”

Switch off your pad, and connect it to your computer via USB cable.

It is done and MTK flash tool will do the rest.

After the tool prompted with a green circle. congrats you have successfully flash your pad with MTK Flash Tool.

https://www.youtube.com/watch?v=80sCEc9Stnk

Member
2019-05-27 06:12:55
#4F

Avoid flashing from the site, it’s outdated. I did that and got an annoying bug over my M8 tablet, I can’t change brightness anymore.

Member
2019-05-27 06:13:43
#5F

Better yet, avoid flashing the M8-20181201 one, try factory reset + system updates

Moderator
2019-09-20 15:18:28
#2F

see:http://www.alldocube.com/en/support/

use mtk flash tool to upgrade the firmware

Viewing 5 posts - 1 through 5 (of 5 total)
Post a new Topic
SUBSCRIBE NOW