Home

>

Support

>

System update

>

iPlay 20/iPlay 20 Pro

iPlay 20/iPlay 20 Pro

Tutorial

System Firmware

Recommended Applications

Please pay attention to back up the tablet data before flashing, beware of data loss due to errors. FAQs

iPlay20(T1011S)-EN-20201208

Product Model : T1011S/T1011B

File size : 1.28GB

Downloads : 85143

Update log:

The old version firmwares for Iplay20:

IPlay20(T1011S)-EN-20200824

IPlay20(T1011S)-EN-20200723

IPlay20(T1011S)-EN-20200708

IPlay20(T1011S)-EN-20200616

firmware upgrade tool & guide download link:

Spreadtrum Upgrade Tool and Guide.rar

Download

To be opened

All Comments (44 comments)

Leave a Reply to Geoff Nolan Cancel reply

  • It did not work for me. The upgrade software worked just fine and loaded the downloaded file on the pc. That’s as far as it went. I connected the tablet and tried what you suggested, both with the tablet on and switched off. I pressed the volume up and volume down button on the tablet after pressing the play arrow in the upgrade software screen but nothing happens at all. Any ideas? Am I missing something?

    |
    1. Napíš mi svoj mail lebo je to dvojmo všetko …napíšeme si krok pokroku

      |
  • I used SPD_Upgrade_Tool_R24.0.0003
    but that you already know, of course.
    So: open the software, click on the start/play arrow…. connect the tablet to PC, but before you get logged out, or before connecting, press play button and volume button on the tablet (volume button first, then play button)…. hold the button down until the update starts
    Hold it for about 40s
    It worked for me….

    |
    1. Do you mean we have to connect tablet to pc first, then pess volume down button in tablet before press play button on the flash tool on PC?
      Correct Sir?

      |
  • Can you please share your solution. Thanks

    |
  • ahoj Pavel , už som to vyriešil ..ozvi sa mi na robertd@atlas.sk

    |
    1. Can you please share your solution. Thanks

      |
  • The tablet does not have a fully functional android 10. Some language options are missing (such as Slovak language).
    WiFi 5g connection does not work either.
    Software update is not possible. Even after a great effort and despite me following the product manual I was not able to update it. The tablet stops working and gets disconnected in the middle of the update process.
    I have tried several ways to update the device and none of them were successful.

    |
    1. Presne mám tiež taký problém …písal som výrobcom a nič len že napíšu

      |
  • It would be really helpful if Alldocube would push a firmware update over the air (OTA) by WiFi. Pleas consider this, as it would greatly help all users.

    |
  • I have the same problem as Geoff Nolan. Connect the tablet to the PC and then disconnect and cannot update ………

    |
  • I have followed the tutorial and connected my iPlay20 to my windows 10 laptop. However, the connection is lost as soon as I power off the tablet, as instructed in the tutorial. Am I missing something? How can I update my firmware while the tablet is switched off?

    |
  • Louis Lee

    This update version

    t1011s_v1.0_20200620-1875

    |
  • Louis Lee

    I know there is an update to this firmware version, but I don’t receive any update push after flashing this firmware already 2 days after. Can anyone help me?

    |
    1. 蓝青昊 reply to Louis Lee

      重新下载固件刷机。收到推送20200708版本

      |
1 2 3 4
SUBSCRIBE NOW