iPlay 20 Pro
KNote X Pro
Global - Engilsh
中国 - 简体中文
日本 - 日本語
iPlay 20/iPlay 20 Pro
Please pay attention to back up the tablet data before flashing, beware of data loss due to errors. FAQs
Product Model : T1011S/T1011B
Release date : 2020-10-16
File size : 1.21GB
Downloads : 18,475
The last three version firmwares for Iplay20 is:
File size : 52.5MB
Support system : Windows
Tool for Alldocube users to update Tablet's system.
I used SPD_Upgrade_Tool_R24.0.0003
but that you already know, of course.
So: open the software, click on the start/play arrow.... connect the tablet to PC, but before you get logged out, or before connecting, press play button and volume button on the tablet (volume button first, then play button).... hold the button down until the update starts
Hold it for about 40s
It worked for me....
It did not work for me. The upgrade software worked just fine and loaded the downloaded file on the pc. That's as far as it went. I connected the tablet and tried what you suggested, both with the tablet on and switched off. I pressed the volume up and volume down button on the tablet after pressing the play arrow in the upgrade software screen but nothing happens at all. Any ideas? Am I missing something?
Napíš mi svoj mail lebo je to dvojmo všetko ...napíšeme si krok pokroku
Ide to aj takto. Ale ja som použil iný spôsob stiahol som do Pc https://mega.nz/file/dBMVmQoY#Rc7k_2j5HPE6lpCrmxUYXiB1zhBChXRuKIZ_7_1FwBU
a iPlay20 (T1011S) -SK-20200824.
Postup je tu na stránke výrobcu https://www.alldocube.com/en/firmware/alldocube-iplay20t1011s-firmware-download/comment-page-2/#comment-6835 a potom som odzipoval oba programy to všetko na Pc. Otvoril som súbor Spreadtrum Upgrade Tool and Guide a tam po otvorení je ResearchDownload. Dvojklik otvorí program a tento program otvorí súbor iPlay20 (T1011S) -SK-20200824 sám alebo treba cez prvé ozubené koliesko otvoriť iPlay20 (T1011S) -SK-20200824. Pripojiť tablet ku Pc a následne stlačiť tlačidlo play trojuholník. A program aktualizuje firmware tabletu na vyššiu verziu.
Skúšal som postup od Robertdano a ten postup ma naviedol na postup ktorý som použil ja. Lebo môj Windows nechcel pustiť program.
volume button --
silence / -- / minus
I have tried everything but without any success. Even worse, my tablet has crashed. It now has a completely black screen and does not respond to any combination of button presses. Does anyone know how to recover from this situation? Luckily, I did a full back up beforehand, so should be able to recover data to a new tablet, if I can't restore it.
Thank you. I have managed to fix the problem. For your info, I removed the back of the tablet, disconnected and reconnected the battery, connected the pc and ran the upgrade tool again after pressing and holding the up volume button. It worked! The tablet was reset with the new firmware. Only problem is, I had to reload all my apps from my backup. It would be so much easier of the firmware upgrade was issued OTA by WiFi.
Your email address will not be published. Required fields are marked *
Save my name, email, and website in this browser for the next time I comment.
Notify me when new comments are added