Replies created

Topic Forum Replies/Views Last activity
Touch Drivers for iwork20 i1022D Technical Discussion
1
188
https://mega.nz/file/8ElWgILA#J2Za9SICJ1n3J-FCPZHrOKidKZ2t4fEts-_Q-oeI9YY drivers for i1022d
Chrome freezes on iplay 50 pro max Technical Discussion
1
268
Can you provide a video showing that the relevant browser is not working properly, as well as information about the specific web page that is opened?
Alldocube mini pro nfe only has two touch input Technical Discussion
1
1206
Please try to turn off the three-finger screenshot function, and then check whether the multi-finger operation in the corresponding software is normal.
Bricked tablet save iplay50 (T1030) Technical Discussion
2
372
Open the device manager that comes with the Windows operating system. After the machine is shut down and you press and hold the volume down key to connect to the computer, there will be a new device in the device manager. If the driver is installed well, there will be a sprd port. If there is no response at all in the device manager, check the connection problem.
Widevine L1 Technical Discussion
1
442
Widevine L1 requires the operation of writing L1key. Non-L1 machines cannot directly become L1 machines.
GTbook 13 pro not charging Technical Discussion
1
353
You can try to enter the machine bios and reset the bios to the default settings. After the machine is shut down, press and hold the power button for 30 seconds or even more than 1 minute, and then try to completely cut off the power.
SUPPORT Technical Discussion
1
361
Due to design reasons, the type-c interface does not support simultaneous OTG and charging functions of the hub.
Superbox B02 – How to enter The Bios Technical Discussion
1
362
You can try to enter bios by pressing the ESC key on your keyboard when booting up.
Iplay 50 lcd replacement the same as samsung tab a7 screen? Technical Discussion
1
290
The screen parameters may be similar, but the actual screens are still different.
Cube iwork 10 Technical Discussion
1
200
You need to provide the actual model and serial number of the machine, and then contact the email service@alldocube
Viewing 10 posts - 1 through 10 (of 207 total)
SUBSCRIBE NOW